Does Earthlink webmail still support anonymous email addresses? If so, is there an article / thread that covers how to use them in EARTHLINK and THUNDERBIRD? They are still called protection packages =mypacks_net

The following is a simplified representation of my Thunderbird (128.6.0esr (64-bit)) setup for controlling emails in my gmail account. Each account contains many emails and my plan was to transfer many of them to "Local Folders"

Local Folders (on external USB with over 16TB free space)

  Drafts        
  Junk               (empty)
  Trash
  Outbox           (empty)
  All Mail
     > Companies

... ...

     > ZEBRA-2
     Spam	  

abcxxx@gmail.com (on PC with limited free space)

  Inbox	  
     > Acquisitions

... ...

     > ZEBRA-1
     Drafts
     Sent Mail
     All Mail
     Spam
     Trash
     Important
     Starred 	  

I created filters for "Local Folders" and another set of filters for "abcxxx@gmail.com". These filters indeed send emails to the proper location. However, "All Mail" recovers the emails that are transfered and thus is unchanged (after some delay for the recovery process).

How can I setup Thunderbird such that the emails that are successfully filtered to the different accounts will be deleted from their "All Mail" folders?

j 'en peux plus de ces nouvelles version, tu m'étonne qu' il risque de disparaitre ! alors mon profils est sur D depuis 1 milliard d années, je change de disque dur, je transfert le profil assigne la lettre D au nouveau HDD et hop plus rien à l allumage du pigeon ! je recrée un profil transfert les ancien dossiers ..ect... (comme j ai toujours fait depuis le paléolithique environ. mais niet, désinstalle , réinstalle, V128 marche pas , V115 marche pas..... ça souplesse était sont principal atout, ben alors on change..... je crois que je vais chercher une alternative ! en attendant si vous avez un conseil !! merci de votre aide

Copied Thunderbird Profile from Windows 10 PC, pasted to Windows 11 PC - No email history or address book

I followed the steps to copy the profile from the old PC and paste it into the folder on the old PC.

Thunderbird is using that profile, but there are no email history or address book.

I hope someone can help here. I have used Tbird and FF almost exclusively from release. Thundebird is my only email program and the whole thing is playing up badly at the moment. I can send no emails. Some emails that show in the inbox show a blank screen and can not be deleted. All messages I send come back with an end of message error and SMTP blocked (see attached). This happened a few weeks ago and my email sourse gave me some new settings using port 587 and it worked ok until a few days ago then exactly the same again. They have checked and everyting works ok for them. I then checked with BitDefender to see if they could assist and everything was as expected so I did a complete computr scan with it and it came back with 3 trojan errors all of which were in Thunderbird. So I decided to do a complete delete and reinstall. No matter what I do or what I deleteincluding shutdown after every delete, when I reinstall it comes back with the total and Faulty Thunderbird So I can't start with a clean sheet. Not that I would like to as I have hundreds of contacts an email saves going back many years. Suggestions anyone

Hi, I am wondering why I have to close Thunderbird and reopen to get my emails. If I don't get emails for a few hours I close and reopen and there they are. I am running Windows 11, using Comcast/Xfinity, Port 993 and Port 465, SSL/TLS. What should I change or do so I get my emails immediately when they are sent to me? Thanks-In-Advance. Marc

I have two outlook email accounts. With both I get the error: "unable to log in at server probably wrong configuration username or password "

Username and password are correct because a mini browser window pops up, asking me to allow Thunderbird as an authorised program to access my emails.

Configuration matches what's on here: https://support.microsoft.com/en-us/office/pop-imap-and-smtp-settings-for-outlook-com-d088b986-291d-42b8-9564-9c414e2aa040

Also the details are found correctly from probing the server anyway.

Hallo, ich kann seit gestern keine Emails mehr bei Thunderbird versenden und auch keine empfangen. Ich habe 3 Email Adressen dort eingerichtet. Bis gestern funktioniert alles. Woran kann das liegen, habe nichts verändert. Hat ein Thunderbird ein Problem auf den Server zu zugreifen?

Über eine Antwort würde ich mich freuen.

Gruß Sylvia

Since I joined Mozilla Thunderbird, I have been inundated with hundreds of unwanted emails. I cannot unsubscribe from this company. The company that is sending all the unwanted emails has a web address as follows: www.neptunemarkwater.com

How can I stop these unwanted emails? They are ruining the enjoyment I thought I would enjoy by joining your email site.

Tbird ver 91.13.1 Desktop Win 11 Pro ver 23H2, upgraded from Win 10.

Scrollbar disappeared for no apparent reason about five days ago when composing emails.

I'm also working an older draft and it's still functional, as it is on replies to received messages that have scrollbars.

I have gone to Troubleshooting Mode and restarted, disabled add-ons and restarted, no effect.

I also verified that scrollbars were enabled, to no effect. On second thought, I went into the registry and found that the Dynamic Scrollbars actually DID have an incorrect value of (0). Changing it to (1), closing out, and restarting also had no effect. Are there other scrollbar values that should be adjusted?? I hate that nearly-invisible Windows scrollbar that has to be pulled out when needed. Could that possibly be related, or is there a patch for that?

How do I save all my emails, drafts, and sent messages if it's necessary to delete and reinstall the same version? I have one active yahoo account and one hotmail that's no longer active, but I want to save the contents.

I don't want to upgrade to 102, which comments seem to imply may have undesired changes. It seems that every upgrade requires research to disable unwanted features or glitches.

I need that scrollbar to navigate messages as I revise them, not having it is just Not Acceptable.

Thx in advance, J_

Guys, I am on TB 128.6.0esr (64-bit) and I am using TB since Netscape era (25 years now).

Since last update, when I try to forward an email in my Sent box, it produces a blank window with only the subject filled-in. No content, no attachments.

I tried Repair to the box but it's still the same.

The problem happens with all recent mails but not with all older mails. For example, some older mails, sent e.g. one year ago, or more, when clicking forward, behave as expected, with content and attachments. Other ones, however, do not work and open as blank windows, as I explained.

It works always with "Forward as Attachment", but this is NOT what I want.

Has anyone faced this problem? Do you have any suggestions? Should I file a bug?

Please advise.

Thanks, Nick

I am receiving the following error message on a Win 11 desktop running Thunderbird 128.6.0.esr (64 bit): "The folder '[Gmail]/Trash on my.fr33.email@gmail.com' could not be compacted because writing to the folder failed. Verify that you have enough disk space, and that you have write privileges to the file system, then try again." I do not have a folder [Gmail]/Trash on the gmail server. I also do not get this error on other Thunderbird clients running Win 10 or Win 11. I also do NOT get the error when I manually compact the my.fr33.email account, either at the account level or at the Gmail folder level. Once I acknowledge the error the system seems to run normally until is wants to automatically compact folders. Any suggestions will be appreciated. -- John Randle Knoxville, TN

When retrieving/syncing mail from my imap account, the counter for incoming mail is always wrong, it says it is retrieving 4 out of 2 or 8 out of 1. Already tried the repair function, but that didn't help. Any ideas?

Thunderbird v. 115.14.0.

Sometimes, one or two of my emails do not display properly in the Message Pane. Here is a small sample showing part of one message. Is there a way to fix this? I am using TBird 102.15.1 (64-bit).

}=09@media only screen and (max-width: 480px){ =09=09body=2Ctable=2Ctd=2Cp=2Ca=2Cli=2Cblockquote{ =09=09=09-webkit-text-size-adjust:none !important; =09=09}

}=09@media only screen and (max-width: 480px){ =09=09body{ =09=09=09width:100% !important; =09=09=09min-width:100% !important; =09=09}

}=09@media only screen and (max-width: 480px){ =09=09.mcnRetinaImage{ =09=09=09max-width:100% !important; =09=09}

}=09@media only screen and (max-width: 480px){ =09=09.mcnImage{ =09=09=09width:100% !important; =09=09}

}=09@media only screen and (max-width: 480px){

09=09.mcnCartContainer=2C.mcnCaptionTopContent=2C.mcnRecContentContainer

2C.mcnCaptionBottomContent=2C.mcnTextContentContainer=2C.mcnBoxedTextCont

entContainer=2C.mcnImageGroupContentContainer=2C.mcnCaptionLeftTextContent= Container=2C.mcnCaptionRightTextContentContainer=2C.mcnCaptionLeftImageCon= tentContainer=2C.mcnCaptionRightImageContentContainer=2C.mcnImageCardLeftT= extContentContainer=2C.mcnImageCardRightTextContentContainer=2C.mcnImageCa= rdLeftImageContentContainer=2C.mcnImageCardRightImageContentContainer{ =09=09=09max-width:100% !important; =09=09=09width:100% !important; =09=09}