How to transfer message filters from one computer to another (each with same T-bird version, on same email acct)?

I have T-bird version 128.7.0esr (64-bit) on both my desktop Dell and my laptop Dell. On the Desktop I have a message filter for removing common sources of spam/junkmail … (read more)

I have T-bird version 128.7.0esr (64-bit) on both my desktop Dell and my laptop Dell. On the Desktop I have a message filter for removing common sources of spam/junkmail to the Trash. I tried to make that filter available by copying the msgFilterRules.dat file in the Imapmail folder of my desktop's T-bird profile under AppData/Thunderbird (I have a Windows 11 Enterprise OS...the laptop is Windows 10 Enterprise OS) to the Imapmail folder on my laptop's T-bird profile. After this copying process was done (with T-bird not running on the laptop) I loaded T-bird on the laptop, but the filter on the desktop did not appear under filters on the laptop. Note: while the email account for both T-bird installations is the same, the *profile name* is different. Perhaps that is the source of my problem. I *could* backup the T-bird installation on my desktop and then use that backup to install T-bird again on my laptop. But I wonder if there is a simpler solution that preserves the bulk of what is on each of these two T-bird installations?

Asked by jasonpotter 27 minutes ago

Sync with my email server

Hi, I've been using Thunderbird for a few days now. I'm slowly learning the ropes. Between my wife and I we use 2 computers and two phones. I have set up the computer… (read more)

Hi,

I've been using Thunderbird for a few days now. I'm slowly learning the ropes. Between my wife and I we use 2 computers and two phones. I have set up the computers to use POP3. My logic being that I want a copy of all email activities on at least one of my computers at home. (I noticed that only my inbox is has been imported to my Thunderbird files on my computers, no other folders have been imported.) However, I've just discovered that when I create and send an email from Thunderbird on my home computer, a copy is not saved on my service provider's sent folder (@bell.net). I'm assuming that is because I'm using POP3. If I understand correctly, if I use IMAP all my folders will be synched (including my sent etc) between my service provider and my computers. Is that correct? If so, then I guess I should be using IMAP instead of POP3. If that's true then is my only option to occasionally archive my Thunderbird files before cleaning up my service provider folders? Thanks for your insights.

Asked by jlmackelvie 28 minutes ago

  • Imetatuliwa

Thunderbird lightning

I've had thunderbird for years, for the task component. It's wonderful. I got a new computer, but now have lost all my recurring tasks. I saved the profile on our netwo… (read more)

I've had thunderbird for years, for the task component. It's wonderful. I got a new computer, but now have lost all my recurring tasks. I saved the profile on our network but cannot locate where to put in the path so import the task file into thunderbird. I did not find it in the community forums; so I must not be asking the question right. Any assistance is helpful.

Thank you

Asked by Colleen Noon 3 hours ago

Answered by wquatan 1 hour ago

No Folders in Filters possible

Dear filter specialists, On a Windows 10 computer with TB Portable 128.6 and .7, folders can no longer be selected in the filters as ‘Run filter on’ or ‘perform these A… (read more)

Dear filter specialists,

On a Windows 10 computer with TB Portable 128.6 and .7, folders can no longer be selected in the filters as ‘Run filter on’ or ‘perform these Actions’: the menu is greyed out. The phenomenon occurs with all accounts: POP and local. Various email providers, ESET virus scanner, Windows firewall, FritzBox cable router. The local account contains almost 30 GB of emails. The existing filters work as long as they do not affect the accounts or folders: for example, tagging e-mails works. Existing filters with folder-actions cannot be re-configured and no folder actions are possible when creating a new filter.

I have performed an update check and restarted Windows, changed the compression limit from 500 to 5 MB and changed a few minor settings so that the config is rewritten.

What could this be? How do I solve the problem? A workaround if necessary.

Thank you very much for your help.

Asked by accounts.firefox.com5 32 minutes ago

Importing Yahoo mailbox

I am having an issue with converting my Yahoo email to Thunderbird. I see I have 6500 emails in my Yahoo email account, but do not see my emails in Thunderbird Inbox. I… (read more)

I am having an issue with converting my Yahoo email to Thunderbird. I see I have 6500 emails in my Yahoo email account, but do not see my emails in Thunderbird Inbox.

I have a default view of 10,000 messages but cannot see my first email.

Asked by Salvador Dominguez 6 days ago

Last reply by Toad-Hall 38 minutes ago

Thunderbird Problem

Thunderbird Problem: For many years I have been using the Thunderbird mail client currently in ver. 128.7.0esr (32 bit) on S.O. Windows 10 Home Update 22H2 (OS Build 1904… (read more)

Thunderbird Problem: For many years I have been using the Thunderbird mail client currently in ver. 128.7.0esr (32 bit) on S.O. Windows 10 Home Update 22H2 (OS Build 19045.5487), 64-bit operating system, x64-based processor. I have a couple of mail accounts, one of mine and one of my wife. My problem is that for a few days now (about 5 or 6 days) on the InBox folder of my account, only mine, I have not been able to compact the folder. When I try to compact it, the response message is always the following: <The Inbox folder on "my_account_name@gmail.com" cannot be compacted because it is not possible to write to it. Verify that you have enough disk space and have write privileges, then try again> On my disk the available space is 121 Gb on C: where the program with the InBox folders resides and 266 Gb where the data stored in custom folders resides. The write privileges are always the same, never changed, of Administrator. I have already tried the path of "repairing the folder" and re-indexing the folder, but without success. Can someone suggest a remedy, please? Thanks Riccardo ITALIANO Da molti anni uso il client di posta Thunderbird attualmente in ver. 128.7.0esr (32 bit) su S.O. Windows 10 Home Agg. 22H2 (Build sistema operativo 19045.5487), Sistema operativo a 64 bit, processore basato su x64. Ho un paio di account di posta, uno mio e uno di mia moglie. Il mio problema è che da qualche giorno in qua (circa 5 o 6 giorni) sulla cartella InBox del mio account, solo del mio, non riesco ad eseguire la compattazione della cartella. Al tentativo di compattarla il messaggio di risposta è sempre il seguente: <La cartella Posta in arrivo su "nome_mio_account@gmail,com" non può essere compattata in quanto non è possibile scriverci. Verificare di avere spazio su disco sufficiente e avere privilegi di scrittura, quindi riprovare> Sul mio disco lo spazio disponibile è di 121 Gb su C: dove risiede il programma con le cartelle InBox e di 266 Gb dove risiedono i dati archiviati in cartelle personalizzate. I privilegi di scrittura sono sempre quelli, mai cambiati, di Amministratore. Ho già tentato la strada della "riparazione della cartella" e della re-indicizzazione della cartella, ma senza successo. Qualcuno può suggerirmi un rimedio, per favore? Grazie Riccardo

Asked by riccardonarducci 2 days ago

Last reply by riccardonarducci 1 hour ago

checking inbox??

I have used Thunderbird for many years and currently with 4 hotmail and 3 gmail accounts AND...randomly some accounts I have to the enter the Inbox ONLY when i check ano… (read more)

I have used Thunderbird for many years and currently with 4 hotmail and 3 gmail accounts AND...randomly some accounts I have to the enter the Inbox ONLY when i check another link on the account such as "draft" "sent" or other before i am let into INBOX ?? WHY? I have not noticed whether its gmail or hotmail accounts at fault ??

Asked by davebenbow 1 hour ago

Last reply by DavidGG 1 hour ago

Calendar events not showing up on Calendar unless Notify attendees is unchecked

When I create a calendar event, it will not show up in the calendar view (Month), even after trying several times. What I found is, it will only show up on the calendar i… (read more)

When I create a calendar event, it will not show up in the calendar view (Month), even after trying several times. What I found is, it will only show up on the calendar if I uncheck the Notify Attendees box at the bottom, which is by default always checked. After I uncheck the Notify attendees box on an event, that event, and each successive event will then show up on the calendar, regardless if I have the Notify attendees box checked or unchecked. I looked to see if I can uncheck this box in Settings, but do not see where this can be done.

Is there a way to have the Notify attendees box unchecked by default when I create a new calendar event?

Asked by Don Barton 3 days ago

Last reply by Toad-Hall 1 hour ago

contacts and email lists

Hi I am having an issue with getting new contacts to add to a email group. It was working just fine and then, I couldn't add anymore new contacts. What is going on and ho… (read more)

Hi I am having an issue with getting new contacts to add to a email group. It was working just fine and then, I couldn't add anymore new contacts. What is going on and how do I fix it? Sue

Asked by sue84 2 days ago

Last reply by Toad-Hall 1 hour ago

shortcuts

I have two profiles in my Thunderbird account. I want to create desktop shortcut for each profile. That way I can use the shortcut to get my email. On on profile I just… (read more)

I have two profiles in my Thunderbird account. I want to create desktop shortcut for each profile. That way I can use the shortcut to get my email. On on profile I just want it to go straight to that account without asking for a password. On the other one I want it to ask me for a password. Is that possible and if so how can I do that?

Asked by shortstop1 4 days ago

Last reply by shortstop1 1 hour ago

Creating a new task does not show Attendee field

Hi, I'm searching for a possiblity to assign a task to a user, like it is possible for an event. According to RFC 5545 this should be possible for VTODO however in the G… (read more)

Hi,

I'm searching for a possiblity to assign a task to a user, like it is possible for an event. According to RFC 5545 this should be possible for VTODO however in the GUI the "Attendee" field is missing. Is this an intended situation?

Regards

Resu0815

Asked by resu0815 2 days ago

Last reply by Toad-Hall 1 hour ago

How do you choose which email account Calendar uses to invite attendees to an event?

I can't find any reference to this and have stopped using one of my email accounts...and need to have outbound invites go through another one. I thought changing the "de… (read more)

I can't find any reference to this and have stopped using one of my email accounts...and need to have outbound invites go through another one. I thought changing the "default" email address (which I've done successfully I believe) would do the trick but it doesn't. Thoughts?

Asked by eskayincfl 2 hours ago

Thunderbird "Unable to log in at server" for AT&T/Yahoo

Thunderbird stopped working on my old Mac Mini (2014). I bought another used Mac Mini (2018), running on Sequoia 15.3, and hoped to install Thunderbird on it, but so far … (read more)

Thunderbird stopped working on my old Mac Mini (2014). I bought another used Mac Mini (2018), running on Sequoia 15.3, and hoped to install Thunderbird on it, but so far I can't. When I try to set it up, it says my account is recognized, but when I click done, I get the message "Unable to log in at server. Probably wrong configuration, username or password." I suspect it's the configuration. I tried my old Mozilla password, when that didn't work, I created a new one, but that didn't work for Thunderbird either.

My email comes from my ISP — AT&T — whose email service is powered by Yahoo. When Thunderbird stopped working on my old computer. I started using MyYahoo email (same email address), but I'd prefer going back to Thunderbird, which is much better for archiving and directing incoming email to folders I create.

Please help.

Asked by petergrfx 21 hours ago

Thunderbird crashes on startup

Program keeps crashing on startup. This has been happening for a week or so but it would load second time. Now won't load up at all. I have reinstalled but to no avail … (read more)

Program keeps crashing on startup. This has been happening for a week or so but it would load second time. Now won't load up at all. I have reinstalled but to no avail

Asked by paul.sandham1103 6 days ago

Last reply by Wayne Mery 2 hours ago

  • Imetatuliwa

Very long connecting time on first launch

I'm on Thunderbird (128.6.0esr (64-bit)) on Fedora/GNOME. I've noticed, that whenever I launch Thunderbird, it takes several minutes (!) where it says "Connecting to mail… (read more)

I'm on Thunderbird (128.6.0esr (64-bit)) on Fedora/GNOME. I've noticed, that whenever I launch Thunderbird, it takes several minutes (!) where it says "Connecting to mail.myserver.com" in status. I'm using my own postfix/dovecot server with imap and I don't have this problem on Thunderbird Windows for instance, where it connects right away on startup. After the initial slow connection, it works just fine, when I manually trigger to scan for new messages (instantly). I tried literally any option within Thunderbird to fix that, without any success. It seems to be some trouble with resolving / dns or probably ip6/ip4, but then again, why would it work normally after the long connection time in the beginning? Any clue what might be the problem here?

Asked by Knock Knock Knight 6 days ago

Answered by Knock Knock Knight 6 days ago

ThunderBird for Linux crashes down automatically every 5 minutes since the last update.

ThunderBird for Linux crashes down automatically every 5 minutes since the last update. Every time I log into my account, about 5 minutes later, I see from the monitoring… (read more)

ThunderBird for Linux crashes down automatically every 5 minutes since the last update. Every time I log into my account, about 5 minutes later, I see from the monitoring terminal that ThunderBird's temporary memory usage suddenly soars to over 90%, and then the entire program becomes unresponsive and must be closed and logged in again. But after that, this situation keeps repeating, and it is impossible to use it. Can anyone help? Thanks!

Asked by Alex 5 days ago

Last reply by Wayne Mery 2 hours ago