Getting SSL_ERROR_NO_CYPHER_OVERLAP when attempting a site with a self-signed certificate
I'm developing a web app. Currently, I'm using a self-signed certificate (getting it properly signed comes later).
When I have the web server set so that it only accepts TLS1.1 and TLS1.2, I'm getting a SSL_ERROR_NO_CYPHER_OVERLAP error. And, of course, trying the 'use outdated security' link doesn't work, since the web server won't allow those connections.
If I temporarily allow insecure connections on the web server, Firefox will then allow me to accept the cert. After the cert is accepted, Firefox can then connect over only TLS1.1 and TLS1.2. So, most of the time, Firefox can find a common cypher for TLS1.1/1.2 connections.
(The web server is on an Ubuntu kernel, with OpenSSL1.0.1f.)
Gekose oplossing
I finally figured out what is going on.
The fix is really in configuring OpenSSL; however, since Firefox is the browser that most readily displays the problem, I'm going to post the answer here.
[NOTE: if you get this error on Firefox, and you're not in control of the web site you visit, you'll need to send an e-mail to the web site administrator, with the error you're getting]
Anyway, at issue is the separation in OpenSSL of the protocols supported vs. the cipher list.
In an app using OpenSSL, if you're using anything older than OpenSSL 1.1.0, you'll need to disable any protocol older than TLSv1. Do this with:
SSL_CTX_set_options(ctx, SSL_OP_NO_SSLv2 | SSL_OP_NO_SSLv3);
(Note that recent versions of OpenSSL before version 1.1.0 have SSLv2 turned off by default, but it doesn't hurt to explicitly disable it with this call. Also note that if you disable TLSv1 [i.e. add ' | SSL_OP_NO_TLSv1' to the above call], you'll break compatibility with some apps that make HTTPS calls; for example Firefox appears to use TLSv1 to do the certificate exchange, before going to stronger protocols for the session).
The key to understanding the SSL_NO_CYPHER_OVERLAP error is that TLSv1 only uses SSLv3 ciphers.
So, I was running into this issue because when I disabled SSLv3, I was also disabling the SSLv3 ciphers. To set the OpenSSL ciphers, use something like:
SSL_CTL_set_cipher_list(ctx, "TLSv1.2:TLSv1:SSLv3:!SSLv2:HIGH:!MEDIUM:!LOW");
If you use instead (as I was originally using):
SSL_CTL_set_cipher_list(ctx, "TLSv1.2:TLSv1:!SSLv3:!SSLv2:HIGH:!MEDIUM:!LOW");
You'll effectively disable TLSv1, since there are no TLSv1-specific ciphers (at least in OpenSSL), and with the SSLv3 ciphers disabled, it isn't possible to establish a TLSv1 connection.
With SSLv3 disabled, but the TLSv1/SSLv3 ciphers enabled, Firefox is able to get the certificates. After this, I see that Firefox then establishes a TLSv1.2 connection.
Most of the above solution is not needed for OpenSSL 1.1.0, since that has no support for SSLv3 at all.
Lees dié antwoord in konteks 👍 4All Replies (20)
You can check the server via this website:
Thanks for your reply.
Unfortunately, I'm developing behind a firewall, so said site isn't able to scan it.
Is there a way to find out what ciphers Firefox attempted?
(It still seems strange that if I have Firefox accept the certificate, by temporarily reducing security, that Firefox is then able to agree on a high security cipher.)
What connection settings does Firefox use if you allow lower security?
You can check that in the Security tab in the Network Monitor.
Don't know if I'm quite clicking on the correct place.
With Network Monitor open, if I click on the GET request, the security tab is only saying that the security certificate is invalid (which I expect, since it is invalid).
In experimenting with different security settings on the server, it appears that when I get "invalid certificate", it is using SSLv3, while if I set the server for TLS only, I get "no cypher overlap" (although I'm not seeing a SSLv3 warning in the security tab).
If I go to about:config, and search on security*ssl, I see a large number of enabled ciphers in the list. If I search on security*tls, I don't see any ciphers listed.
I've attached screen shots. The one with "no cypher overlap" is what I get when I disable SSLv3 on my web server, and the one with "unknown issuer" is what I get when I enable SSLv3 on my web server.
(Both Chrome and IE just give me the "invalid certificate" error, but will otherwise connect.)
Gewysig op deur gshonle
I did a tcpdump trace; 10.1.233.67 is the system running Firefox; 10.1.85.41 is the Linux server. See attached image.
Here are the TLSv1.2 ciphers supported by the Linux OpenSSL:
ECDHE-RSA-AES256-GCM-SHA384 ECDHE-ECDSA-AES256-GCM-SHA384 ECDHE-RSA-AES256-SHA384 ECDHE-ECDSA-AES256-SHA384 DHE-DSS-AES256-GCM-SHA384 DHE-RSA-AES256-GCM-SHA384 DHE-RSA-AES256-SHA256 DHE-DSS-AES256-SHA256 ECDH-RSA-AES256-GCM-SHA384 ECDH-ECDSA-AES256-GCM-SHA384 ECDH-RSA-AES256-SHA384 ECDH-ECDSA-AES256-SHA384 AES256-GCM-SHA384 AES256-SHA256 ECDHE-RSA-AES128-GCM-SHA256 ECDHE-ECDSA-AES128-GCM-SHA256 ECDHE-RSA-AES128-SHA256 ECDHE-ECDSA-AES128-SHA256 DHE-DSS-AES128-GCM-SHA256 DHE-RSA-AES128-GCM-SHA256 DHE-RSA-AES128-SHA256 DHE-DSS-AES128-SHA256 ECDH-RSA-AES128-GCM-SHA256 ECDH-ECDSA-AES128-GCM-SHA256 ECDH-RSA-AES128-SHA256 ECDH-ECDSA-AES128-SHA256 AES128-GCM-SHA256 AES128-SHA256
So, it looks like they almost overlap...
SSL handshaking is over my head, but two things:
(1) Under no circumstances will recent versions of Firefox use SSLv3 as a protocol. The lowest supported protocol is TLS 1.0.
(2) In about:config, the preference names for the ciphers contain ssl3, but this is an historical artifact and has no bearing on the protocol that is used. These ciphers need to be enabled in order to be available for TLS connections.
There are two ciphers I recommend setting to false, since they are associated with the Logjam issue:
security.ssl3.dhe_rsa_aes_128_sha security.ssl3.dhe_rsa_aes_256_sha
Some users may prefer to set the two RC4 ciphers to false as well, but this may create problems with older Microsoft IIS servers.
You should be able to connect securely using these ciphers (your list => Firefox preference name):
ECDHE-RSA-AES128-GCM-SHA256 => security.ssl3.ecdhe_rsa_aes_128_gcm_sha256
ECDHE-ECDSA-AES128-GCM-SHA256 => security.ssl3.ecdhe_ecdsa_aes_128_gcm_sha256
Both security.ssl3.ecdhe_rsa_aes_128_gcm_sha256 and security.ssl3.ecdhe_ecdsa_aes_128_gcm_sha256 are enabled in Firefox (I'm using the default settings for everything).
So... Still puzzled about what's going on...
See next post
Looking at your last screen shot ("Client Hello"), I'm a little baffled. Is that the client machine's cipher list? It doesn't match Firefox's list -- in particular, to my knowledge, Firefox does not support any CBC ciphers, which comprise nearly all of what's listed. Do you have a proxy in front of Firefox on the client?
Gewysig op deur jscher2000 - Support Volunteer
Oops, I'm wrong based on this site: https://www.ssllabs.com/ssltest/viewMyClient.html -- CBC appears in several of the cipher names there even if they do not appear in about:config.
Cipher Suites (in order of preference) TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256 (0xc02b) Forward Secrecy 128 TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256 (0xc02f) Forward Secrecy 128 TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA (0xc00a) Forward Secrecy 256 TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA (0xc009) Forward Secrecy 128 TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA (0xc013) Forward Secrecy 128 TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA (0xc014) Forward Secrecy 256 TLS_RSA_WITH_AES_128_CBC_SHA (0x2f) 128 TLS_RSA_WITH_AES_256_CBC_SHA (0x35) 256 TLS_RSA_WITH_3DES_EDE_CBC_SHA (0xa) 112
These two do not appear on my normal list, as I have disabled them as mentioned earlier:
TLS_DHE_RSA_WITH_AES_128_CBC_SHA (0x33) Forward Secrecy 128 TLS_DHE_RSA_WITH_AES_256_CBC_SHA (0x39) Forward Secrecy 256
With those, there are 11 as you saw in Client Hello.
It appears OpenSSL 1.0.1f is from January 2014. Can you update? There have been a lot of patches since then. https://www.openssl.org/news/vulnerabilities.html
The Hello Client packet is what was sent by the system running Firefox; it was sent when Firefox attempted the connection.
I double-checked, and I don't have a proxy in front of Firefox.
To quote Alice: Curiouser and curiouser...
Yes, OpenSSL 1.0.1f is from January of 2014, and I'd prefer if we went to a newer version. Unfortunately, the current plan is to not move to a newer OpenSSL right now (not my choice).
Any ideas on a next step?
What happens if you click the "(Not secure) Try loading" link?
If you also need to override the bad certificate, accept a temporary exception.
Then assuming you get a secure connection, check the protocol and cipher listed on the Page Info dialog, security panel, toward the bottom, which you can view using either:
- right-click (on Mac Ctrl+click) a blank area of the page and choose View Page Info > Security
- (menu bar) Tools > Page Info > Security
- click the padlock or "i" icon in the address bar, then the ">" button, then More Information
What shows as in use there?
See attached for what happens if I click on the (Not secure) link. Since my server is set to not use SSLv3, Firefox can't connect.
If I temporarily enable SSLv3 on my server, I can accept the invalid certificate. Then, the connection uses TLS 1.2 (Cipher is TLS_RSA_WITH_AES_128_CBC_SHA, 128 bit keys). (If I permanently accept the certificate, I can always connect immediately, even with SSLv3 disabled on my server.)
I don't think this has anything to do with SSLv3, since Firefox 46 does not support SSLv3 at all under any circumstances. When you enable SSLv3 on the server, I think that must change something else at the same time.
The error you got was SSL_ERROR_INAPPROPRIATE_FALLBACK_ALERT which indicated the server tried to downgrade from TLS1.2 to a lower protocol. That doesn't really make sense from what you're describing, but might be seen with RC4 ciphers.
Anyway, no point troubleshooting this old version of OpenSSL any further.
The product I'm working on has an embedded Linux system, with a web server as part of the total product. Because it is not running on standard hardware, we're limited on which Linux distros we can use. The latest OpenSSL deb package for that distro is 1.0.1f. For reasons beyond the scope of this discussion, we are only using updates that have deb packages.
So, unfortunately, it looks like we'll have to document that only Chrome and IE are supported, and to not use Firefox.
Gewysig op deur gshonle
You might bring it to your supplier's attention, since they ultimately will be blamed for your product's inability to make a secure connection with Firefox.
I'm not sure if it's applicable to your product, but for some websites, you can enable fallback by adding a host name to this preference:
(1) In a new tab, type or paste about:config in the address bar and press Enter/Return. Click the button promising to be careful.
(2) In the search box above the list, type or paste TLS and pause while the list is filtered
(3) Double-click the security.tls.insecure_fallback_hosts preference and, either:
(A) If it's empty, type or paste the host name and click OK
(B) If one or more other host names is already listed, press the End key to go to the end, type a comma, then type or paste the additonal host name and click OK
If I add the host to the insecure_fallback_hosts, I now get: "The server rejected the handshake because the client downgraded to a lower TLS version than the server supports. Error code: SSL_ERROR_INAPPROPRIATE_FALLBACK_ALERT"
The server is currently configured for TLSv1.2, TLSv1.1 and TLSv1.
Well, TLS 1.0 is the lowest TLS on both sides, so this error makes no sense. I really don't know what is going on there. It's not behaving like other servers users have reported (not that I can read everything posted here).
I can't log into a military website and I used to be able to. - forum volunteer can replicate fallback error connecting to server that supports TLS1.1 and TLS1.0 but not TLS1.2
"Secure Connection Failed" occurring on growing number of sites, v40.0.2 - firewall configuration problem causing fallback error message
Server prefers RC4 ciphers (problem in Firefox 36+):
Error code: ssl_error_inappropriate_fallback_alert - unclear whether it was solved
he page you are trying to view cannot be shown because the authenticity of the received data could not be verified. - BitDefender possible culprit
Bank of America loads only in WINDOWS Safe Mode - only once in normal after that - BitDefender was the culprit
You can try to increase security.tls.version.min temporarily to 2 (or 3) to see what effect this has.