Visi produktai Community Forum

I recently updated my browser, and I've noticed that while listening to music on YouTube, for some reason, the volume slider within the player also controls the stream volume within KDE Plasma's volume mixer, making for a much more frustrating experience. Now the volume resets to what was set on YOUTUBE rather than sticking to what was set in the VOLUME MIXER every time a new video plays or any time the page refreshes. This means that the volume gets reset every. single. time. The issue with this is not only that YouTube's volume slider isn't as accurate as KDE Plasma's, but also that a media player in a browser shouldn't be controlling its own system volume within the mixer because it causes issues and frustrations like these.

How do I separate player and stream volume?

Here's my inxi so you can see what I'm using/what I'm on: ```text System:

 Kernel: 6.12.9-arch1-1-znver4 arch: x86_64 bits: 64 compiler: gcc v: 14.2.1 clocksource: tsc
   avail: hpet,acpi_pm parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux-znver4
   root=UUID=22984bc3-83f6-4891-a0a2-238f768ee899 rw rootflags=subvol=@
   resume=UUID=499703b6-f007-4f7c-8275-23c80bee1446 loglevel=3 ibt=off
 Desktop: KDE Plasma v: 6.2.5 tk: Qt v: N/A info: frameworks v: 6.10.0 wm: kwin_wayland tools:
   avail: lxlock vt: 1 dm: SDDM Distro: Garuda base: Arch Linux

Machine:

 Type: Desktop Mobo: Micro-Star model: MPG B650 CARBON WIFI (MS-7D74) v: 1.0
   serial: <superuser required> uuid: <superuser required> UEFI: American Megatrends LLC. v: 1.E0
   date: 07/25/2024

CPU:

 Info: model: AMD Ryzen 7 7800X3D bits: 64 type: MT MCP arch: Zen 4 gen: 4 level: v4 note: check
   built: 2022+ process: TSMC n5 (5nm) family: 0x19 (25) model-id: 0x61 (97) stepping: 2
   microcode: 0xA601209
 Topology: cpus: 1x dies: 1 clusters: 1 cores: 8 threads: 16 tpc: 2 smt: enabled cache:
   L1: 512 KiB desc: d-8x32 KiB; i-8x32 KiB L2: 8 MiB desc: 8x1024 KiB L3: 96 MiB desc: 1x96 MiB
 Speed (MHz): avg: 4546 min/max: 545/5050 boost: enabled scaling: driver: amd-pstate-epp
   governor: performance cores: 1: 4546 2: 4546 3: 4546 4: 4546 5: 4546 6: 4546 7: 4546 8: 4546
   9: 4546 10: 4546 11: 4546 12: 4546 13: 4546 14: 4546 15: 4546 16: 4546 bogomips: 134463
 Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
 Vulnerabilities: <filter>

Graphics:

 Device-1: Advanced Micro Devices [AMD/ATI] Navi 31 [Radeon RX 7900 XT/7900 XTX/7900 GRE/7900M]
   vendor: Sapphire NITRO+ driver: amdgpu v: kernel arch: RDNA-3 code: Navi-3x
   process: TSMC n5 (5nm) built: 2022+ pcie: gen: 4 speed: 16 GT/s lanes: 16 ports:
   active: DP-1,DP-2 empty: HDMI-A-1,HDMI-A-2,Writeback-1 bus-ID: 03:00.0 chip-ID: 1002:744c
   class-ID: 0300
 Device-2: Advanced Micro Devices [AMD/ATI] Raphael vendor: Micro-Star MSI driver: amdgpu
   v: kernel arch: RDNA-2 code: Navi-2x process: TSMC n7 (7nm) built: 2020-22 pcie: gen: 4
   speed: 16 GT/s lanes: 16 ports: active: none empty: DP-3, DP-4, DP-5, HDMI-A-3, Writeback-2
   bus-ID: 14:00.0 chip-ID: 1002:164e class-ID: 0300 temp: 43.0 C
 Display: wayland server: X.org v: 1.21.1.15 with: Xwayland v: 24.1.4 compositor: kwin_wayland
   driver: X: loaded: amdgpu unloaded: modesetting,radeon alternate: fbdev,vesa dri: radeonsi
   gpu: amdgpu d-rect: 5120x2880 display-ID: 0
 Monitor-1: DP-1 pos: bottom-l model: LG (GoldStar) ULTRAGEAR serial: <filter> built: 2023 res:
   mode: 2560x1440 hz: 144 scale: 120% (1.2) to: 2133x1200 dpi: 109 gamma: 1.2
   size: 597x336mm (23.5x13.23") diag: 685mm (27") ratio: 16:9 modes: max: 2560x1440 min: 640x480
 Monitor-2: DP-2 pos: top-right model: LG (GoldStar) ULTRAGEAR serial: <filter> built: 2023 res:
   mode: 2560x1440 hz: 144 scale: 213% (2.13) to: 1200x2133 dpi: 109 gamma: 1.2
   size: 597x336mm (23.5x13.23") diag: 685mm (27") ratio: 16:9 modes: max: 2560x1440 min: 640x480
 API: EGL v: 1.5 hw: drv: amd radeonsi platforms: device: 0 drv: radeonsi device: 1
   drv: radeonsi device: 2 drv: swrast gbm: drv: kms_swrast surfaceless: drv: radeonsi wayland:
   drv: radeonsi x11: drv: radeonsi
 API: OpenGL v: 4.6 compat-v: 4.5 vendor: amd mesa v: 24.3.3-arch1.2 glx-v: 1.4
   direct-render: yes renderer: AMD Radeon RX 7900 XTX (radeonsi navi31 LLVM 19.1.6 DRM 3.59
   6.12.9-arch1-1-znver4) device-ID: 1002:744c memory: 23.44 GiB unified: no display-ID: :1.0
 API: Vulkan v: 1.4.303 layers: 15 device: 0 type: discrete-gpu name: AMD Radeon RX 7900 XTX
   (RADV NAVI31) driver: N/A device-ID: 1002:744c surfaces: xcb,xlib,wayland device: 1
   type: integrated-gpu name: AMD Radeon Graphics (RADV RAPHAEL_MENDOCINO) driver: N/A
   device-ID: 1002:164e surfaces: xcb,xlib,wayland device: 2 type: cpu name: llvmpipe (LLVM
   19.1.6 256 bits) driver: N/A device-ID: 10005:0000 surfaces: xcb,xlib,wayland
 Info: Tools: api: clinfo, eglinfo, glxinfo, vulkaninfo de: kscreen-console,kscreen-doctor
   gpu: corectrl wl: wayland-info x11: xdpyinfo, xprop, xrandr

Aud io:

 Device-1: Advanced Micro Devices [AMD/ATI] Navi 31 HDMI/DP Audio driver: snd_hda_intel v: kernel
   pcie: gen: 4 speed: 16 GT/s lanes: 16 bus-ID: 03:00.1 chip-ID: 1002:ab30 class-ID: 0403
 Device-2: Advanced Micro Devices [AMD/ATI] Rembrandt Radeon High Definition Audio
   vendor: Micro-Star MSI driver: snd_hda_intel v: kernel pcie: gen: 4 speed: 16 GT/s lanes: 16
   bus-ID: 14:00.1 chip-ID: 1002:1640 class-ID: 0403
 Device-3: Advanced Micro Devices [AMD] Family 17h/19h/1ah HD Audio vendor: Micro-Star MSI
   driver: snd_hda_intel v: kernel pcie: gen: 4 speed: 16 GT/s lanes: 16 bus-ID: 14:00.6
   chip-ID: 1022:15e3 class-ID: 0403
 Device-4: JMTek LLC. USB PnP Audio Device driver: hid-generic,snd-usb-audio,usbhid type: USB
   rev: 1.1 speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 1-5.1:4 chip-ID: 0c76:161e class-ID: 0300
 Device-5: Micro Star USB Audio driver: hid-generic,snd-usb-audio,usbhid type: USB rev: 2.0
   speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 1-6:3 chip-ID: 0db0:70d3 class-ID: 0300
 API: ALSA v: k6.12.9-arch1-1-znver4 status: kernel-api with: aoss type: oss-emulator tools: N/A
 Server-1: sndiod v: N/A status: off tools: aucat,midicat,sndioctl
 Server-2: PipeWire v: 1.2.7 status: active with: 1: pipewire-pulse status: active
   2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
   tools: pactl,pw-cat,pw-cli,wpctl

Network:

 Device-1: Realtek RTL8125 2.5GbE vendor: Micro-Star MSI driver: r8169 v: kernel pcie: gen: 2
   speed: 5 GT/s lanes: 1 port: c000 bus-ID: 0f:00.0 chip-ID: 10ec:8125 class-ID: 0200
 IF: enp15s0 state: down mac: <filter>
 Device-2: MEDIATEK MT7922 802.11ax PCI Express Wireless Network Adapter driver: mt7921e
   v: kernel pcie: gen: 2 speed: 5 GT/s lanes: 1 bus-ID: 10:00.0 chip-ID: 14c3:0616 class-ID: 0280
 IF: wlp16s0 state: up mac: <filter>
 Info: services: NetworkManager, smbd, systemd-timesyncd, wpa_supplicant

Bluetooth:

 Device-1: MediaTek Wireless_Device driver: btusb v: 0.8 type: USB rev: 2.1 speed: 480 Mb/s
   lanes: 1 mode: 2.0 bus-ID: 1-7:8 chip-ID: 0e8d:0616 class-ID: e001 serial: <filter>
 Report: btmgmt ID: hci0 rfk-id: 0 state: up address: <filter> bt-v: 5.2 lmp-v: 11 status:
   discoverable: no pairing: no class-ID: 6c0104

Drives:

 Local Storage: total: 2.73 TiB used: 493.01 GiB (17.6%)
 SMART Message: Unable to run smartctl. Root privileges required.
 ID-1: /dev/nvme0n1 maj-min: 259:4 vendor: Western Digital model: WD BLACK SN770 1TB
   size: 931.51 GiB block-size: physical: 512 B logical: 512 B speed: 63.2 Gb/s lanes: 4 tech: SSD
   serial: <filter> fw-rev: 731120WD temp: 38.9 C scheme: GPT
 ID-2: /dev/nvme1n1 maj-min: 259:0 vendor: Smart Modular Tech. model: SHPP41-2000GM
   size: 1.82 TiB block-size: physical: 512 B logical: 512 B speed: 63.2 Gb/s lanes: 4 tech: SSD
   serial: <filter> fw-rev: 51060A20 temp: 57.9 C scheme: GPT

Partition:

 ID-1: / raw-size: 1.79 TiB size: 1.79 TiB (100.00%) used: 493.01 GiB (27.0%) fs: btrfs
   dev: /dev/nvme1n1p2 maj-min: 259:2
 ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%) used: 588 KiB (0.2%) fs: vfat
   dev: /dev/nvme1n1p1 maj-min: 259:1
 ID-3: /home raw-size: 1.79 TiB size: 1.79 TiB (100.00%) used: 493.01 GiB (27.0%) fs: btrfs
   dev: /dev/nvme1n1p2 maj-min: 259:2
 ID-4: /var/log raw-size: 1.79 TiB size: 1.79 TiB (100.00%) used: 493.01 GiB (27.0%) fs: btrfs
   dev: /dev/nvme1n1p2 maj-min: 259:2
 ID-5: /var/tmp raw-size: 1.79 TiB size: 1.79 TiB (100.00%) used: 493.01 GiB (27.0%) fs: btrfs
   dev: /dev/nvme1n1p2 maj-min: 259:2

Swap:

 Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default) zswap: no
 ID-1: swap-1 type: zram size: 30.45 GiB used: 1.81 GiB (6.0%) priority: 100 comp: zstd
   avail: lzo-rle,lzo,lz4,lz4hc,deflate,842 max-streams: 16 dev: /dev/zram0
 ID-2: swap-2 type: partition size: 33.5 GiB used: 0 KiB (0.0%) priority: -2 dev: /dev/nvme1n1p3
   maj-min: 259:3

Sensors:

 System Temperatures: cpu: 74.1 C mobo: 54.0 C
 Fan Speeds (rpm): N/A
 GPU: device: amdgpu temp: 43.0 C device: amdgpu temp: 72.0 C mem: 78.0 C fan: 568
watts: 165.00

Info:

 Memory: total: 32 GiB note: est. available: 30.45 GiB used: 16.65 GiB (54.7%)
 Processes: 567 Power: uptime: 6h 30m states: freeze,mem,disk suspend: deep avail: s2idle
   wakeups: 0 hibernate: platform avail: shutdown, reboot, suspend, test_resume image: 12.17 GiB
   services: org_kde_powerdevil, power-profiles-daemon, upowerd Init: systemd v: 257
   default: graphical tool: systemctl
 Packages: 2003 pm: pacman pkgs: 1982 libs: 581 tools: octopi,pamac,paru pm: appimage pkgs: 0
   pm: flatpak pkgs: 21 Compilers: clang: 19.1.6 gcc: 14.2.1 Client: shell wrapper v: 5.2.37-release
   inxi: 3.3.37

Garuda (2.6.26-1.1):

 System install date:     2024-12-16
 Last full system update: 2025-01-16 ↻
 Is partially upgraded:   No
 Relevant software:       snapper NetworkManager dracut
 Windows dual boot:       Probably (Run as root to verify)
 Failed units:            

```

I'm a mac user. A few days ago, I got a message on Firefox stating that a new update wasn't able to download automatically, and it advised me to download the latest version of the app instead. I attempted to do this from the Mozilla site, but the file would never download no matter how long I waited; it would get all the way to the end and just spin endlessly without completing the download. I thought I might be having some issue with Firefox in general, so I attempted to uninstall and reinstall the app; I uninstalled it but then found myself still unable to download the app to reinstall it even while using other browsers like Chrome or Safari. I've tried repeatedly to download the app while connected to different wi-fi networks, networks which I've known to be stable. I've been able to download other files without an issue (although none I've tried are as large). I even tried to complete the download using a proxy site, but was still unsuccessful. Is there anything else I can try? Thank you!

Second post trying to figure out what is going on.

I'm getting the notification that I need to update Firefox, so I click the "download" button which takes me to "https://www.mozilla.org/en-US/firefox/new/?reason=manual-update", I select the "Download Firefox" button and after a few seconds I get a "Secure Connection Failed" message.

Usually I can just open Chrome and download the Firefox installer but today I'm getting an error stating that "download.mozilla.org" is using certificates from a different website.

Is the download site busted, or is this just a me issue?

My Bookmarks in 134.0.1 Firefox Release January 14, 2025 V have disappeared to about 80% in the side and in the toolbar and cannot be changed: i.e. I tried to import a brand new working JSON file - it is not possible to restore! It is neither possible now to edit the toolbars. My OS is Win11 Pro from Win 10. Please advise a.s.a.p. Thank you.

I am a senior citizen and trying my best to keep up with techno stuff. I have used FF for a long time with no problems. I am a keen Amateur photographer. I have started doing on line courses with the school of Photography, and some of the tutorial videos are very pixelated and UN-viewable. I have also just started subscribing to Adobe Light room and its the same there videos very pixelated. I contacted Dell as my laptop is only a few weeks old so they did remote assist and installed new drivers etc, then sent a follow up email in case all was not well. They suggested I contacted Adobe, so this i did and they did remote assist they also saw what i saw then the person s aid all is OK there end, so whilst doing remote the person installed Chrome on my laptop and the videos open perfectly. also within Firefox I hav started having the same issue with u tube videos, so can someone help me please is there a what is it ah yes extension. Whilst writing this something has come to mind i have always looked at u tube before with FF so is it this new laptop? hope someone can help please as no way i want Chrome but if i can not view LR videos in FF I will have no choice.Many thanks.

Hello all again. Thanks for past help.

For the TB 115 I am using I have duplicate emails and I have loaded the add on from Eyal Rozenberg.

And this is going to be a super stupid question. How do I get it to run. I have it in the settings with the Flag blue on. I have looked at the default wrench settings.

But nothing happens. I see that I can add a short cut but cannot figure out how to do it.

Yes I have attempted to do online research but cannot see it. I am sure it is like 2 steps.

Sorry for my questions and thank you for your kind responses.

The reason is I have too many duplicate emails that I cannot even compact my email boxes. I have many years of emails on this tb 115.

thank you

moi j'aimerais que vos arrêter de me prendre pour un jambon parc que je voudrais avoir cette appli mais vous aller me demander le numéro donc moi je vous dirais non parce que vous penser que l'intelligente artificiel vous aide mais vous faite erreurs je voudrais que vous désinstaller l'intelligente artificiel

cordialement

                                                    lyam charpiot

Feature request: a way to easily backup & restore settings, allowing clean reinstallation without having to manually enter frequently used sites into the search settings.

Using Firefox Klar for Android

I am unable to export from tbird windows to Android. When I click on the first qr code and then done phone goes back to the import page. This has been for quite awhile. I have 9 accounts to export and get 3 qr codes on pc.

What do I?

Same on w10 or w11.

I am about to lose access to Outlook. My current settings show imap.mail.yahoo.com and smtp.mail.yahoo.com and it is working. This is an sbcglobal.net account. When I look at what ATT says it should be due to changes they made it reflects imap.mail.att.net and smtp.mail.att.net. The ports are the same between both choices. It says on both of these when entered that it can't access and the user name or password is incorrect which is not the case. Any help out there???