Pesquisar no site de suporte

Evite golpes de suporte. Nunca pedimos que você ligue ou envie uma mensagem de texto para um número de telefone, ou compartilhe informações pessoais. Denuncie atividades suspeitas usando a opção “Denunciar abuso”.

Saiba mais

Esta discussão foi arquivada. Faça uma nova pergunta se precisa de ajuda.

How can I increase the font size in the FF57 toolbars and menus

more options

How can I increase the font size in the FF57 toolbars and menus but without affecting content area (displayed web pages). Fonts in toolbars and menus of FF57 are way too small for me.

Using layout.css.devPixelsPerPx 1.25 isn't sulution for me as it also increases font size in displayed web pages. I want to change only font size in FF toolbars and menus.

In previous versions of FF I used Theme Font & Size Changer Addon but in FF57 it isn't able to change font size.

Is it so hard for Mozilla developers to add separate font size changing feature ONLY for toolbars and menus?!

How can I increase the font size in the FF57 toolbars and menus but without affecting content area (displayed web pages). Fonts in toolbars and menus of FF57 are way too small for me. Using layout.css.devPixelsPerPx 1.25 isn't sulution for me as it also increases font size in displayed web pages. I want to change only font size in FF toolbars and menus. In previous versions of FF I used Theme Font & Size Changer Addon but in FF57 it isn't able to change font size. Is it so hard for Mozilla developers to add separate font size changing feature ONLY for toolbars and menus?!

Solução escolhida

Wow, this is a very detailed look at Windows settings! What Firefox offers is the following:

Global Zoom Factor

This will enlarge both the toolbar area and the content area:

(1) In a new tab, type or paste about:config in the address bar and press Enter. Click the button accepting the risk.

(2) In the filter box, type or paste pix and pause while the list is filtered

(3) Double-click layout.css.devPixelsPerPx and change its value to 1.25 and click OK, which corresponds to 125% font size in Windows display settings. The toolbar area should enlarge after a few moments. Too small? Try 1.5 and see whether that suits you better. And so on. If you are on Mac and use a Retina display, anything below 2.0 may be smaller than what you started with, so start with 2.0.

Important: Do not go below 1.0 because it may become too tiny to edit.

Websites Too Big?

You can counteract the global zoom with an extension that allows you to reduce zoom on all pages as you open them. You can still fine-tune the zoom level on sites, but this will normalize them.

For example:

https://addons.mozilla.org/firefox/addon/zoom-page-we/

It's a little difficult to find its global default setting for websites, but you can counteract the global setting, for example:

  • Global setting 1.25 + Zoom Page default 80% => pages at 100%
  • Global setting 1.5 + Zoom Page default 75% => pages at 100%
  • Global setting 2.0 + Zoom Page default 50% => pages at 100%

I'm attaching an old screenshot, I don't know if this is still where you set the percentage.

Ler esta resposta 👍 15

Todas as respostas (20)

more options

Hello, have you ever try this module ? Theme Font & Size Changer

more options

I had to help a friend with this. There's kind of a lot to it.

Here are my notes. I'll put each item in a separate message, to keep things straight.

The first thing is:

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Using ICC Profiles in Windows . . . https://pcmonitors.info/articles/using-icc-profiles-in-windows/

Ask me anything / "Display" . . . Where did this go? . . . Control Panel / Display / Adjust resolution / Advanced settings

Color Management - select monitor from the drop down / [check] Use my settings for this device / Close

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

https://www.reddit.com/r/Windows10/comments/64i5u5/iccnvidia_custom_color_profiles_being_reset_by/

Delete current ICC Profile?

Color Management / Advanced / "Change system defaults" from the bottom / Advanced / "Use Windows display calibration"

Then put in the ICC profile, make it as default, and remove everything else you have in that list

more options

keywords: win 10 do not wrap icon text

Icon spacing . . . https://www.tenforums.com/general-support/6154-icon-spacing.html

THE ANSWER IS HERE . . . https://www.tenforums.com/customization/45913-increase-text-length-prevent-text-wrapping-under-desktop-icons.html

Don't set a "Custom Scaling Level," instead, just change two values in the Registry . . . determined, based on trial and error . . . -1300 lets you have two rows of text, that do not wrap, if there are spaces between the words . . . the article says to make them the same value, so it's a square . . . there is some auto-snap of the icons based on these values, and having it set as a square makes this more predictable?

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

HKEY_CURRENT_USER\Control Panel\Desktop\WindowMetrics

IconSpacing . . . Default Value = -1130 . . . Change it to -1300 IconVerticalSpacing . . . Default Value = -1130 . . . Change it to -1300

- - - - - - - - -

06/07/17 on the z240 IconSpacing Default Value = -1125 Change it to -1400 changes it to -1395 IconVerticalSpacing Default Value = -1125 Change it to -1400 changes it to -1395 . . . not big enough if there are three rows under the icon

IconSpacing Default Value = -1125 Change it to -1500 no diff IconVerticalSpacing Default Value = -1125 Change it to -1500 no diff

IconSpacing Default Value = -1125 Change it to -2000 no diff IconVerticalSpacing Default Value = -1125 Change it to -2000 no diff

If there are 3 rows, it's going to hide the third one

IconSpacing Default Value = -1125 Change it to -1300 it stays at -1300 IconVerticalSpacing Default Value = -1125 Change it to -1300 it stays at -1300

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Note: With Desktop icons, if the word is all one string, it can't put words on the second row

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

THIS ALSO WORKS: click any open area on your desktop press and hold the Ctrl key mouse wheel in one direction to increase the icon size mouse wheel in the other direction to decrease the icon size

more options

In FF57 Theme Font & Size Changer can't change font size. There is matching information from addon author "Because of the new extension system on Firefox, most of the functionality of the Theme Font & Size Changer is not available any more."

more options

Install:

"Winaero Tweaker" provides a GUI access to tweak the necessary registry settings . . . http://winaero.com/comment.php?comment.news.1836

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Advanced Appearance Settings / Icons

Set Horizontal and Vertical spacing to 86 This shows up as -1290 in the Registry. If you change it to -1300 each, which I did, the slider still says 86

. . . z240: I changed these in the Registry to -1400 . . . they show up here as 93

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

more options

Winaero Tweaker / Advanced Appearance Settings / System Font

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

The default is Segoe UI . . . Do not change it here:

1.) I changed it to Liberation Sans, there is no option to select BOLD, 11 pt

At first glance, you see that it changes colons in the clock to little boxes

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

2.) Later, you see that you can't see X's and arrows to use in windows, like in e-mail

If you change the System Font, it changes colons in the clock to little boxes? https://www.tenforums.com/installation-upgrade/82691-win-10-pro-creators-update-taskbar-clock-anomaly-any-suggestions.html I had this issue with Win 10 Pro Creators as well after I changed the system font to Arial using winaero tweaker. I just went back there and restored that page to the default font [CLICK IN THE TOP CENTER], which is Segoe UI, and the clock went back to normal. All the other changes I made in the advanced appearance section worked, and I am please with the appearance on Win 10 Pro CE now.

USEFUL SYSTEM FONTS, FROM SMALL TO LARGER Segoe UI Liberation Sans Verdana

POSSIBLE DARK FONTS Segoe UI Black Arial Black DejuVu Sans Franklin Gothic Medium Miscrosoft YaHei UI Source Sans Pro Black

It's ok to change the font on all the other possibilities, though (next)

more options

Winaero Tweaker / Advanced Appearance Settings

In order from small to larger: Segoe UI / Liberation Sans / Verdana

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Laptop 03/16/17 I changed it from the default of "Segoe UI" to "Liberation Sans" . . . I made everything: 11 pt, "Bold"

z240 06/07/17 I changed it from the default of "Segoe UI" to "Verdana" 10/15/17 But with this new Win 10 update, leave it on the default of "Segoe UI", because when zoomed in, Verdana is jagged and blurry. . . . Below, the first number is the default. If it can't be 12 pt, the necessary size is stated, and reason.

Laptop 10/30/17 With this new Win 10 update, leave font on the default of Segoe UI, and use the font sizes I figured out, "Bold" . . . The only smaller one would be "Message Font" 11/06/17 I notice that Liberation Sans is slightly larger, but not as dark . . . use Liberation Sans, "Bold"

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Icons Regular, 9 ... 11 pt ... 12 is too big for Properties/Previous Version Menus Regular, 9 ... 12 pt

Message Font Regular, 9 ... 10 pt ... 11 works for SeaMonkey / E-Mail / Server Settings / Advanced ... 11 is too big for the AdwCleaner menu Statusbar Font Regular, 9 ... 12 pt Window Title Bars Regular, 9 ... 12 pt

more options

smorele said

Hello, have you ever try this module ? Theme Font & Size Changer

In FF57 Theme Font & Size Changer can't change font size. There is matching information from addon author "Because of the new extension system on Firefox, most of the functionality of the Theme Font & Size Changer is not available any more."

more options

Win 10 / right-click Desktop / Display settings Change the size of text, apps, and other items . . . 100 . . . 125 . . . 150 . . . 175

Set to 150%

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Adjust brightness level . . . 0 to 100

Set to 80

more options

sludge7051-x said

Winaero Tweaker / Advanced Appearance Settings / System Font

I don't want to change system font size.

more options

Control Panel / Fonts / Adjust Clear Type text

Win 10 / Search (located just to the right of the Start button) / type "fonts" / then click the item that appears at the top of the results: Fonts - Control panel . . . this shows all the fonts on your system . . . Left column: Adjust Clear Type text

Just select the darkest text in each section

more options

sludge7051-x said

Win 10 / right-click Desktop / Display settings Change the size of text, apps, and other items . . . 100 . . . 125 . . . 150 . . . 175 Set to 150%

I don't want to change font size in system setting as it will affect all applications I'm using. I want to change font size of FireFox 57 toolbars and menus ONLY.

more options

Correct, don't do a global System font change . . . just change the "size" of individual items to what works for you.

When they do a big update, everything goes back to default, and you'll have to re-do this.

more options

sludge7051-x said

Correct, don't do a global System font change . . . just change the "size" of individual items to what works for you. When they do a big update, everything goes back to default, and you'll have to re-do this.

"Win 10 / right-click Desktop / Display settings Change the size of text, apps, and other items . . . 100 . . . 125 . . . 150 . . . 175 Set to 150%" is an global change affecting all applications not only FF menus and toolbars!

more options

Solução escolhida

Wow, this is a very detailed look at Windows settings! What Firefox offers is the following:

Global Zoom Factor

This will enlarge both the toolbar area and the content area:

(1) In a new tab, type or paste about:config in the address bar and press Enter. Click the button accepting the risk.

(2) In the filter box, type or paste pix and pause while the list is filtered

(3) Double-click layout.css.devPixelsPerPx and change its value to 1.25 and click OK, which corresponds to 125% font size in Windows display settings. The toolbar area should enlarge after a few moments. Too small? Try 1.5 and see whether that suits you better. And so on. If you are on Mac and use a Retina display, anything below 2.0 may be smaller than what you started with, so start with 2.0.

Important: Do not go below 1.0 because it may become too tiny to edit.

Websites Too Big?

You can counteract the global zoom with an extension that allows you to reduce zoom on all pages as you open them. You can still fine-tune the zoom level on sites, but this will normalize them.

For example:

https://addons.mozilla.org/firefox/addon/zoom-page-we/

It's a little difficult to find its global default setting for websites, but you can counteract the global setting, for example:

  • Global setting 1.25 + Zoom Page default 80% => pages at 100%
  • Global setting 1.5 + Zoom Page default 75% => pages at 100%
  • Global setting 2.0 + Zoom Page default 50% => pages at 100%

I'm attaching an old screenshot, I don't know if this is still where you set the percentage.

more options

I see that the default value for:

layout.css.devPixelsPerPx

. . . is -1.0

. . . 1.25 is much better, thanks!

I have a 27" monitor, and am used to using the Zoom Control buttons. I might try Zoom Page WE later, but things seem fine atm. Thanks!

more options

sludge7051-x said

I see that the default value for: layout.css.devPixelsPerPx . . . is -1.0

Yes, -1 is a special flag that means "whatever the OS uses."

more options

Ok . . . confused, because above, it said

. . . Do not go below 1.0 because it may become too tiny to edit.

The text at -1.0 was small, but readable.

Is there a manual that states what the actual, possible range is?

more options

ad_verbum said

sludge7051-x said
Correct, don't do a global System font change . . . just change the "size" of individual items to what works for you. When they do a big update, everything goes back to default, and you'll have to re-do this.


"Win 10 / right-click Desktop / Display settings Change the size of text, apps, and other items . . . 100 . . . 125 . . . 150 . . . 175 Set to 150%" is an global change affecting all applications not only FF menus and toolbars!

How can this be done on a Mac please?

more options

Use this in FF 57:

layout.css.devPixelsPerPx and change its value to 1.25

Then in FF 57:

Tools / Options / General / Language & Appearance / Fonts & Colors - Advanced button . . . and set web page font sizes there

  1. 1
  2. 2