Cannot send emails from Thnderbird
Originally with 123 regd changed service provider to Microsoft Office 365 - Outlook. Can receive and send in Outlook Can only receive in Thunderbird
Server settings IMAP Mail Server Server name as outlook.office365.com Port 993 Outgoing Server (SMTP) Smtp.office365.com Port 587
Checked this with Microsoft technical support says it is correct?
Get message failed
Send Message Error Sending of the message failed. The message could not be sent because the connection to Outgoing server (SMTP) Smtp.office365.com timed out. Try again.
Was working fine before on 123 regd Also have Norton Security
Any ideas ?
Thanks
Keith Roberts
Valgt løsning
Can you confirm you have the correct settings, i.e. smtp.office365.com on port 587, STARTTLS security, authentication = normal password, User name = email address?
Les dette svaret i sammenhengen 👍 2All Replies (16)
Timeouts are often caused by AV programs scanning outgoing mail or SSL (secure) connections. Try disabling that feature in Norton and see if sending works.
Hello Thanks for the information
I via chat have spoken to Norton they remotely connected to my pc changed the files - which made no difference Then they removed Norton - which also made no difference still error when sending Now reinstalled Norton same issue
Also, as mentioned before I via chat have spoken to Microsoft they remotely connected to my pc checked the settings which they say are correct.
Also, can still send and receive emails from Outlook
But issue same can only receive emails in Thunderbird
Cannot send get error message
Sending of the message failed. The message could not be sent because the connection to Outgoing server (SMTP) Smtp.office365.com timed out. Try again
Any ideas ?
Thanks Keith Roberts
Valgt løsning
Can you confirm you have the correct settings, i.e. smtp.office365.com on port 587, STARTTLS security, authentication = normal password, User name = email address?
Thanks for that
I changed the security from SSL/TLS to STARTTLS
Works fine now
Thanks
Keith Roberts
Hi Keith Can you select sfhowes answer regarding selecting : STARTTLS security as a 'Chosen Solution'. This makes it easier for others with similar issue who are looking for a solution. Thanks.
I too am having this problem and when changing to STARTTLS I receive the following message " unable to establish a secure link with O/G server [SMTP] smtp-mail.outlook.com since it doesn't advertise this feature" If using SSL/TLS I receive a timout message, Avast is my virus protection and the mail protection has been switched off but no joy. This seems to be a common problem over the last few weeks and I am now so fed up that considering ditching TB. I tried switching to Office 365 server as I am on both platforms { the same?] but no joy. My Yahoo mail works OK just my Office/outlook mail so is this a TB problem or is Microsoft trying to force people to use their own mail interface?
johnco said
I too am having this problem and when changing to STARTTLS I receive the following message " unable to establish a secure link with O/G server [SMTP] smtp-mail.outlook.com since it doesn't advertise this feature" If using SSL/TLS I receive a timout message, Avast is my virus protection and the mail protection has been switched off but no joy. This seems to be a common problem over the last few weeks and I am now so fed up that considering ditching TB. I tried switching to Office 365 server as I am on both platforms { the same?] but no joy. My Yahoo mail works OK just my Office/outlook mail so is this a TB problem or is Microsoft trying to force people to use their own mail interface?
Do you have two-step verification on the account? If so, you need to use an app password. Otherwise, try changing the server settings to the ones listed above for smtp.office365.com.
Besides disabling Mial Shield in Avast, you may need to disable SSL connection scanning.
Thanks for replying. I have tried the settings for smtp.office365.com and it initially worked then I get a "thunderbird has reset " message and will not send. How do I disable SSL connection setting? I tried setting the O/G server with no security but outlook/office would not recognise this and asked for my password and then did not recognise it, so is there a setting in a different programme that I need to reset? Thanks
There's no point setting the outgoing security to None, as that is not the required setting. To disable SSL scanning, see this article:
https://help.avast.com/en/av_free/12/settings_sh_mail_ssl.html
Disable the email scanning component in Mail Shield as well.
https://help.avast.com/en/av_free/17/settings_sh_mail_basic.html
Neither of these solutions have helped as I do not have an SSL button to turn off in Mail shield on AVast Free. I have tried turning Mail Shield off completely but still no joy so the Anti Virus programme is not the problem.
Please post following information: In Thunderbird Help > Troubleshooting Information Copy everything in the 'Mail and News accounts' section Paste info into forum question. Do not edit anything.
I seem to have the same issue: "Sending of the message failed. The message could not be sent because the connection to Outgoing server (SMTP) smtp.office365.com timed out. "
- Server settings appear to be correct as above and as per Microsoft and elsewhere on the web: smtp.office365.com on port 587, STARTTLS security, authentication = normal password, User name = email address
- It happens for all my outlook.com email addresses (yet others are fine). These are just accounts created at outlook.com.
- Tried smtp-mail.outlook.com - same result
- Tried changing the smtp server settings semi-randomly with no good outcome except when I pointed it to a completely different server (chimail.uk2.net, no security) for which it complained but worked.
- Incoming is POP and works fine.
- Turned of Mcafee firewall and virus checking - no affect.
- Using a brand new win 10 machine with OS and s/w out of the box except for only Netscape 7.1 (to migrate emails from) and Thunderbird.
I hope someone can help please? Kind regards, Jonathan
Endret
conway.costigan6 said
I seem to have the same issue: "Sending of the message failed. The message could not be sent because the connection to Outgoing server (SMTP) smtp.office365.com timed out. "I hope someone can help please? Kind regards, Jonathan
- Turned of Mcafee firewall and virus checking - no affect.
- Using a brand new win 10 machine with OS and s/w out of the box except for only Netscape 7.1 (to migrate emails from) and Thunderbird.
Timeouts are usually caused by antivirus. McAfee is a notorious example. Running in Windows safe mode is the best way to test if startup apps, such as AV, are causing problems, short of uninstalling the AV.
https://support.mozilla.org/en-US/questions/1276110#answer-1277919
Many thanks for the suggestion.
After a few hours of trying, I got the machine into ‘safe mode with networking’ but networking doesn't work despite the name ;-). Searched the web and it seems it is expected behaviour for some reason (there was mention that a wired connection may be worth trying but I have no RJ45 on my laptop to try that). Either way, unfortunately I can't test Thunderbird sending an email in safe mode.
As part of the attempt I went into safe mode a few times, stopped and started Mcafee a few times, recreated previous attempts, rebooted a few times, attempted many test emails – i.e. nothing material. But somehow it now works.
In case it is useful to anyone, here is what happened.
At some stage when sending a test email a box popped up saying that the outlook sever requested a certificate and should Thunderbird supply one of the following three. (I presume they were migrated from Netscape 4.72 to Netscape 7.1 when I upgraded in 2011 and thence to my new machine at the weekend then Thunderbird 3.1 and up to the latest version.) I think I’d seen this at the weekend and just clicked ok and forgot about it, but this time I read the certificate details – the most recent and default was valid from mid-2002 to mid-2003. So I clicked cancel instead and the email was sent ok. Nothing else changed from earlier attempts and tests so I deduce this was the cause.
Thanks again.
If you need to start Windows in safe mode with networking while connected to wifi, I believe this can be done after Windows is in safe mode by enabling the network wifi adapter in Device Manager.
Thanks. I tried that but it claimed rather laconically, 'This action isn't allowed in Safe Mode'. Perhaps I did it wrong, but anyway, the original issue has gone away so all is well. I'll remember and try your advice re safe mode for future use.
Thanks again, Jonathan